Basic Signal Integrity Analysis
- Course Duration: 24 Hours
- 4.6 Star (Rating)
- 300+ (Student Enrolled till Now)
Basic Signal integrity Analysis is 12 hours of theory and 12 hours of labs course with detailed emphasis on Signal Integrity for complex Simulations and Analysis. Signal Integrity course is targeted for PCB, Package, & Hardware design engineers to gain expertise in Signal Integrity for accurate and proper functioning of electronic devices and systems. This must do course for every electronics and electrical graduate, working professionals. Student may also opt for course on advanced Signal & Power Integrity Training.
Every aspect of course is supported with multiple examples to enable easier & quicker understanding. Course also covers multiple design consideration at simulation examples and testbench setup for the same, and all these executed from scratch. Lab sessions are planned at regular intervals to enable student work on these projects from scratch with trainer guidance. Below is quick overview of what is covered as part of Basic Signal Integrity Analysis.
In this course you will learn Signal integrity concepts and design considerations at Simulations and PCB/Package Layout level.
To examine and identify ways to prevent common signal integrity problems during PCB/Package Designing.
Signal Integrity workshops using industry standard tools.
Course outline:
1. Basic Signal integrity concepts
- Importance of Signal integrity and EM fundamental for Signal integrity
- Transmission lines & their properties
- Reflections & impedance mismatch analysis
- Rise time and Dielectric Material properties
- Termination types and effects
- Stackup design and analysis
Workshops:
- Investigating above Signal quality issues
- Analyzing trace impedance by varying Stackup parameters
- Investigating different termination techniques
- Introduction to Simulation models (IBIS, Spice and S parameters)
- Understanding of IBIS models
- Signalling technologies (LVCMOS,LVDS,SSTL and CML.)
- Differential pairs and Differential impedance
- Crosstalk (near-end/far-end) analysis
- Pre and Post layout analysis methodologies
- Signal topology analysis
Workshops:
- Differential signal analysis
- Analyzing Crosstalk effects in time domain and Frequency domain
- Analyzing Signal quality by using different buffer models
- Analyzing Different signal topologies
2. High speed Signal integrity
- DDRx basics(Signal grouping ,Frequency ,data rate ,ODT and Topologies)
- Differentiating DDR/DDR2/DDR3/DDR4 Interfaces
- Understanding SSTL_18,SSTL_15,SSTL_12,POD logic standards
- Understating Slew rate, AC and DC Logic levels
- DDRx Timing analysis (Setup and Hold time Investigation)
- Simultaneous Switching noise (SSN) analysis
Workshops:
- Preparing DDR3/4 interface for S parameters extraction
- Assigning Source and IBIS models
- Eye diagram analysis for Data, Strobe, Clock and Address signals
- Calculating Setup and hold time Values
- TDR and S parameters
- Differential via design & optimization techniques
- Optimizing impedance Discontinuity for High-Speed Channel Designs
- Dielectric material selection and Fiber Weave effect
- Dielectric loss, Skin effect & Surface roughness
Workshops:
- Differential Via modelling and optimizing Via impedance
- DC Blocking capacitor placement and optimization
- Challenges of multi gigabit designs
- Eye diagram and BER analysis
- Inter symbol interference (ISI) and causes
- High speed channel losses(Insertion loss and Return loss)
- Jitter sources and types of Jitter
- Equalization techniques
Workshops:
- Analyzing Insertion loss and Return loss of Channel
- High speed channel simulation using IBIS-AMI models
- Access to the Instructor – Ask questions to the instructor who taught the course
- Available 24/7 – RaceEL Academy eLearning courses are available when and where you need them.
- Learn at Your Pace – RaceEL Academy eLearning courses are self-paced, so you can proceed when you’re ready.
- Dedicated Trainer Accessible On Phone / Email / Whatsapp
- Trainer Exp: 15+ Years
Course Highlights
- Mentor Support for doubt clarifications
- Product company focused questions
- 24+ hours of lectures
- Industrial Standard tools are used
Testimonials
We had 6 days of technical training from RaceEL on SI/PI/EMC topics. Overall, this training helped us in building concepts and applying the same in our Hardware design. The method of teaching was very simple and even complicated concepts explained in easy manner. We all appreciate your training and looking forward to having advanced training on the same topic.
Surendra
Simulation Engineer
KNORR-BREMSE TECHNOLOGY CENTER INDIA PRIVATE LIMITED
Trainer’s Teaching:
- In-depth coverage of relevant Signal Integrity (SI) issues.
- Clear explanations and industry-relevant examples.
- Effective hands-on training.
- Patient and thorough in addressing questions.
- Precise coverage of SI topics with strong simulation knowledge.
- Practical industry experience in SI, chip-level packaging, and board designs beyond 10G.
- Deep understanding of SI concepts and simulation tools, with the ability to explain even the smallest technical details.
The relevance, quality, and coverage of the topics exceeded expectations. Sessions were clear and understandable, with well-structured exercises and assignments. The trainer summarized key points effectively, aiding retention, and encouraged active participation from the trainees. The overall module rating is very good.
C-DOT Engineering Team
The session was very informative, impressive and professional. We found the course most helpful for us beginners to pitch-in. Thank you for your sincere explanation with all the finer & basic details. All our team members were impressed by your knowledge and the way you carried out the session. As we are beginner to this profile, we expect your continued support on this.
Sandhya IM
Technical Architect
Quest-Global
We would like to extend our sincere gratitude for the exceptional Signal Integrity (SI), PCB, and Hardware training your team conducted. The sessions were insightful and expertly delivered, covering both fundamental and advanced topics with a great balance between theory and practical application.
The trainers demonstrated in-depth knowledge and a remarkable ability to simplify complex concepts, making them easily understandable. We especially appreciated the hands-on exercises and real-world case studies, which provided us with practical tools and techniques to apply directly in our projects.
Shameer
Senior Managerr
Actalent Engineering Services
I have taken Altium training. The training provided by the “RaceEL Technologies” was very informative. It had hands-on on the software and study materials for reference. The person taking the training was an expert with good working knowledge. He was able to respond to some of the practical queries and how to handle them in the software. The training was customised based on our need if requested so, it was very helpful.
Avinash Premji Nair
Senior Firmware Engineer
AMETEK india
Thank you for the excellent Hardware Design and PCB Training for our freshers. The training was well-structured and accessible, providing a strong foundation in essential concepts. The hands-on activities and real-world examples were especially helpful in making complex topics easier to understand.
We appreciate the quality of training and look forward to more sessions with RaceEL Academy.
Hardware team
Thales India.
The Signal Integrity (SI) and Power Integrity (PI) courses provided a comprehensive foundation in high-speed design principles, covering essential topics like crosstalk, impedance matching, voltage ripple, and PDN design with a good balance between theory and practical application. Real-world examples and diagrams made complex concepts accessible, though both courses could benefit from more hands-on practice with simulation tools, detailed case studies, and additional resources for further learning.
Venkat was knowledgeable and approachable, effectively connecting theoretical material to real-world applications, especially in troubleshooting common SI and PI issues. Overall, these courses delivered valuable insights for professionals in PCB design and high-speed electronics, with opportunities for enhancement through extended sessions, interactive lab exercises, and deeper exploration of advanced topics like multi-layer PCB impacts on power integrity and high-density designs for modern applications..
Mohammed Tabesh
Senior Manager
Western Digital
The training was highly effective and well-structured, providing valuable insights throughout the sessions. The course content was comprehensive, relevant, and covered all the necessary topics in depth. The trainer demonstrated excellent knowledge and was thoroughly prepared, which greatly enhanced the learning experience.
Moreover, the trainer’s engagement and interactive approach kept the sessions lively and encouraged active participation. Overall, it was a highly enriching and professionally delivered program.
Hardware Team
Honeywell